This elephant, made of 3-D printed wood, curls into shape when the wood planks are exposed to water. Self Assembly Lab, MIT
This elephant, made of 3-D printed wood, curls into shape when the wood planks are exposed to water.
Self Assembly Lab, MIT
The trick to making wood bend to your will is printing it with an artificial grain---by controlling the pattern designers can determine the final shape it takes when exposed to water. Self Assembly Lab, MIT
The trick to making wood bend to your will is printing it with an artificial grain---by controlling the pattern designers can determine the final shape it takes when exposed to water.
Self Assembly Lab, MIT
As these materials become more robust, Tibbits and researchers Athina Papadopoulou, Carrie McKnelly, Christopher Martin, and Filipe Camposare imagine a future where they can be used to build wonders like self-assembling furniture. Self Assembly Lab, MIT
As these materials become more robust, Tibbits and researchers Athina Papadopoulou, Carrie McKnelly, Christopher Martin, and Filipe Camposare imagine a future where they can be used to build wonders like self-assembling furniture.
Self Assembly Lab, MIT
Tibbits is in the experimental phase with most of these products and attempting to make them work consistently when variables are tweaked. Self Assembly Lab, MIT
Tibbits is in the experimental phase with most of these products and attempting to make them work consistently when variables are tweaked.
Self Assembly Lab, MIT
Carbon fiber that has been infiltrated with a specially formulated compound curls characteristically in response to heat. Self Assembly Lab, MIT
Carbon fiber that has been infiltrated with a specially formulated compound curls characteristically in response to heat.
Self Assembly Lab, MIT
Using this carbon fiber in the spoiler of a race car would allow it to curl sympathetically in response to environmental factors and eke out performance gains which can result in the difference between a win and a loss. Self Assembly Lab, MIT
Using this carbon fiber in the spoiler of a race car would allow it to curl sympathetically in response to environmental factors and eke out performance gains which can result in the difference between a win and a loss.
Self Assembly Lab, MIT
To most people, the things Skylar Tibbits makes at MIT’s Self-Assembly Lab looks like nothing more than scraps of stuff. But where others see bits of wood and swatches of fabric, Tibbits sees robots. Lots and lots of robots.
They don’t have microprocessors, gleaming titanium skeletons, or an unhealthy obsession in Sarah Connor, but the wood panels and carbon fiber Tibbits’ team fabricates combine sensors, logic, and outputs in ways that could transform everything from airplanes to clothing to flat-pack furniture.
As its name suggests, the Self-Assembly Lab focuses on making things that can, well, self-assemble. It has created a series of small wood planks, for instance, that fold into a toy elephants when exposed to moisture. Tibbets and collaborators Christophe Guberan and Erik Demaine are working on clothing that could morph in response to the weather. In the future, the Lab’s research could make way for Ikea furniture that assembles itself with a splash of water—no Allen wrench required.
3-D printed wood “robots” respond to external cues and changes shape. Self Assembly Lab, MIT
How 4-D Printing Works
Tibbits refers to these processes collectively as “4-D printing.” It’s like 3-D printing but with a fourth dimension: time, or as Tibbits likes to call it, “dynamism.” In the future, Tibbits thinks it will be possible to program all types of materials.
The tools Tibbits and company use are not especially novel. In the case of the carbon fiber projects, the manufacturing process is thoroughly two-dimensional. The team starts with a standard carbon fiber roll that follows the typical warp and weft pattern. A secondary material, formulated in Tibbet’s lab to respond to changes in temperature, is spot-printed on the mesh using a CNC gantry. As the carbon fiber is exposed to heat, the temperature-sensitive material changes shape and causes the sheet to deform in ways specified by the designer.
A team is testing the possibility of using it to make a smarter race car spoiler. As the driver turns, friction creates heat that could trigger the temperature-sensitive material in the carbon fiber. As a result, the spoiler would change shape to optimize aerodynamics and eke out greater performance. In time, the same carbon fiber trick could be used to increase a jet engine’s efficiency, lowering its carbon footprint.
The 3-D printed wood projects use a traditional fused deposition printer, like a MakerBot, paired with a specially-formulated plastic filament filled with pulverized wood fibers. By specifying the pattern of the “wood grain” during the printing process, designers can control how it curls when wet.
Tibbits’ work isn’t about using high-end equipment. It’s about tapping the genius-level intellect of his team, including researchers Athina Papadopoulou, Carrie McKnelly, Christopher Martin, and Filipe Camposare, to consider materials in new ways. Each creation combines discordant materials into some cohesive, newly useful whole. “We’ve gotten used to making materials our slaves, but there’s a lot of craft in material properties,” he says.
The shape shifting carbon fiber is being used to make morphing spoilers for race cars by Tibbits team with corporate sponsorship from Autodesk, Carbitex, and the Briggs Automotive Company. Self Assembly Lab, MIT
So When Can I Get My Self Assembling Äpplarö?
In the earliest days of his lab, Tibbits had to struggle with tools to realize his vision. Affordable 3-D printers couldn’t print large objects, so his lab developed software that allowed him to print a 50-foot long chain inside a 5-inch box. Now the barriers to adoption are more prosaic—making engineers aware of these wonder materials and convincing them to give the new stuff a shot.
Mainstream adoption will require refinement and eventually approval from standards organizations and the like. But even more importantly, Tibbits says, is getting engineers to change their mindset about what programmability means.
“I think the biggest barrier is a super outdated mentality of what robots are,” he says. That said, the designer has been able to convince some forward-looking companies, including Carbitex, Autodesk, Airbus, and Briggs Automotive Company, to experiment with his materials and help fund their development.
“We can listen to materials and use them as a programmable material. We can program biology,” he says. “Computing isn’t in computers anymore; computing is everything.”
No comments:
Post a Comment